• LINEAR AC BRUSHLESS SERVO MOTORS

Cog-Free Brushless Servo Motors
• For closed loop servo systems
• Cog-free, smooth operation
• Peak forces to 517 Lbs. (2300 N)
• Accelerations to 10g's (98m/s2)
• Speeds to 200 in/sec
• Accuracy +/- .0001 in/ft. w/ encoder
• Releatability +/- .00004 in. (1um)
• Unlimted stroke length
• No metal-to-metal contact

Single Phase AC Motors
• For closed loop servo systems
• High forces to 1500 Lbs. (6700 N)
• Accelerations to 10g's (98m/s2)
• Speeds to 200 in/sec
• Accuracy +/- .0001 in/ft. w/ encoder
• Releatability +/- .00004 in. (1um)
• Unlimted stroke length
• Non-contact
• Lowest cost per pound of thrust

• TUBULAR BRUSHLESS LINEAR MOTORS (SERVOTUBE)

• Large air gap for easy mechanical integration
• Low mass for high dyamic response
• Moving coil or moving rod
• Stroke legths from 12.17" to 46.46"
• Continuous forces from 9.44 lb-ft to 20 lb-ft
• Peak forces from 70 lb-ft to 175 lb-ft
• Repeatability: 12um
• Accuracy: 250 um

Optional Servo Tube Modules

• Forcer & Single Linear Guide
• Forcer & Load Bearing Guide
• Forcer & Bearing Rail Module

• TT MICRO LINEAR SERVO MOTORS

• Optimal solution for linear positioning of light loads
• Large air gap for easy mechanical integration
• Mount load directly to forcer
• Integral bearing for moving rod applications
• High performance from 24-48V supplies
• Forcer length from 1.42" to 4.45"
• Continuous forces from 3.8 N to 14.4 N
• Peak forces from 19.1 N to 45.1 N
• Speeds to 10m/sec

Optional TT Micro Module
• Ultra-low moving mass
• High precision bearings
• Linear encoders
• Miniature cross section 1.97"H x 2.37"W

• LINEAR DC SERVO MOTORS

DC Brushed Linear Servo Motors
• For closed loop servo systems
• Forces to 240 Lbs. (1070 N)
• Accelerations to 5g's (49m/s2)
• Accuracy +/- .0001 in/ft w/encoder
• Repeatability .00004 in w/encoder
• Stroke lengths to 11 ft. (3.2m)
• Low cost per pound of thrust

Non-Commuted DC Linear Servo Motors
• For closed or open loop systems
• Moving coil or moing magnet
• Constant & reversible forces to 100 Lbs.
• Accelerations to 10g's
• Accuracy +/- .0001 in/ft w/encoder
• Repeatability .00004 in w/encoder
• No commutation required
• Very compact size

• LINEAR STEPPER MOTORS

Single-Axis Linear Stepper Motors
• For open loop systems
• No servo tuning
• Accelerations to 1g (9.8m/s2)
• Forces to 50 Lbs.
• Repeatability .0012 in
• Resolution = Full Step/Number of Microsteps
• 2-phase full step = 0.010 in (.25mm)
• Multiple forcers on a single platen
• Roller bearings or air bearings
• Ceiling or wall mounted
• Air gap <0.001 in
• Lowest cost positioning stage
• Required power supply: microstepping driver

Dual-Axis Stepper Motors
• Two-Axis Motion in a single plane
• For open position loop systems
• No Servo tuning
• Accelerations to 1g (9.8m/s2)
• Repeatability .0012 in
• Flatness: .0005 in/ft
• Multiple forcers on a single platen
• Resolution = Full Step/Number of Microsteps
• High stiffness air bearings
• Mount face up or inverted
• Platens up to 37" x 52"